1. Hello there guest and Welcome to Modular Fox Mustangs home of the 2V, 3V, 4V, Coyote Modular Mustang Conversion Information Website!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

    Dismiss Notice

Frequently Asked Questions

1. What Headers will fit a Stock K-member?

Pertronix / JBA Guy said:
We have had many use the JBA mid-length headers with 3" collector with many aftermarket K-members and even stock. We also have our JBA shorties and they will work 100% but they have a 2.25" collector so you have a smaller outlet on the headers. Check out the mid-length images below and if you need any additional information please let me know.
6632S for the 2v Motor
[​IMG]
6635S for the 4v motors.
[​IMG]
909-599-5955 x 1402
Dustin - JBA Headers
#1

2. What Headers will fit a Tubular K-member?

Pertronix / JBA Guy said:
We have had many use the JBA mid-length headers with 3" collector with many aftermarket K-members and even stock. We also have our JBA shorties and they will work 100% but they have a 2.25" collector so you have a smaller outlet on the headers. Check out the mid-length images below and if you need any additional information please let me know.
6632S for the 2v Motor
[​IMG]
6635S for the 4v motors.
[​IMG]
909-599-5955 x 1402
Dustin - JBA Headers
#2

3. Can I use a 1996-1998 GT Wiring Harness for a 4V engine?

(Can I use my GT computer and harness to start the car as of right now, (aside from the IMRCs, and PATS which are wired open and disabled) the car should fire and run off of the gt programming until i can get it to my local tuner to accomidate for the 24LB injectors and so forth?)

#3
FAQ Manager ©2017 Iversia from RPGfix.