whiteponygt
Well-Known Member
So I started the dash swap and everything has went in rather easy aside from a lot of cussing and wrestling the big ass dash by myself i have run into fitment issue on the driver side the passenger side is completely in and sits flush with the dash and body but on the driver side of the car the dash is all the way against the frame and the frame is bolted into place but the dash is sticking out at the top approx 1.5" is this to be expected with the dash swap or am i missing a set in the install the heater tube that others have cut on a 45 degree and rewelded is actually sitting close to the firewall and is clearing just fine with out cutting any help id appreciate it.