Been doing some research and if worst comes to worst some of the conversion guys are using 96 and up stock k-members.
![2.jpg 2.jpg](http://www.modularfoxmustangs.com/community/data/attachments/0/710-804e962a73326fc120fe614e70020bef.jpg)
![4.jpg 4.jpg](http://www.modularfoxmustangs.com/community/data/attachments/0/711-a4d7fa10e339d9e1241a8366a5e95a05.jpg)
Hey there,
You can use any (V6 included, that is what I used) '96 and up stock k-member. The only thing that you must do to modify this unit for use with your Fox chassis is to cut approximately 1/2" of metal from the rear mounts and extend the corresponding bolt holes forward about the same amount. The modification and installation of this k-member in my Fox Mustang took maybe an hour and a half to complete, including swapping over the a-arms.
Take care,
JT
PS: Don't try to modify your Fox style k-member. What I've mentioned above is a gazillion times easier!
![2.jpg 2.jpg](http://www.modularfoxmustangs.com/community/data/attachments/0/710-804e962a73326fc120fe614e70020bef.jpg)
![4.jpg 4.jpg](http://www.modularfoxmustangs.com/community/data/attachments/0/711-a4d7fa10e339d9e1241a8366a5e95a05.jpg)