bad92gt
New Member
what is everyone using for e-brake cables when you use the irs ?
Hello there guest and Welcome to Modular Fox Mustangs home of the 2V, 3V, 4V, Coyote Modular Mustang Conversion Information Website!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
Is there anyways you could email me that photo, (Derek.armitstead@gmail.com)apparently I don't have enough posts to view it, I'd post more but all of my questions I would post are usually answered in the threads lol. thank you. Also, is there any specific measurements on where to install the bracket on the trans tunnel?Find a local pick and pull yard and salvage the bracket. I had also made one for my Fox after I added a disk rear. I used a piece of angel iron and drilled the hole for the cable to lock into, I then drilled two holes on the other side of the angel for two 3/8 bolts and bolted it to the tranny tunnel. Worked very good for over two years. I hope that this helps out.