Mase Cooper
Member
I am starting my swap with an F-150 Coyote. So far, I have the engine, a TR-3650 (T-56 Upgrade later), majority of my swap parts and I have the the 94/95 Front Spindles, Steeda Ball Joints, the 2002 Dual Piston PBR's (!3" Upgrade later), 1998 GT Rear end 3:73's, with ebrake, trying to figure out this whole steering shaft and steering rack upgrade issue, and looking for a bell housing....
Does the 96-2004 Steering shaft work on this conversion?
Does the 2003/4 Cobra steering rack work and is i power assist?
Is the PBH front accessory kit going to impact my sway bar use?
Anyone have the technical article on the swap bar spacing and getting everything to work, I hear a million tiny pieces of information, need one good detailed link.
Has anyone else used a 96-98 k-member instead of the tubular, I saw Sean Hyland use the regular fox one and notch the member and I hear of others using the 96-98, haven't heard any real details yet.
Lastly, does anyone know of a nice custom steering wheel that has the cruise control settings in it? I love the 94/95 Steering wheel and the early ones fit but there is about a two inch difference pushing the steering wheel towards the driver. The simple solution is to put a 90 or better column in and use the steering wheel, but I am stubborn and want tilt. Since I am not going crazy in some other areas, I wouldn't mind spending to have the column issue addressed by a custom steering column shop as that 94'95 wheel looks nice...
http://www.stangnet.com/mustang-for...ring-wheel-into-87-89-fox.763027/#post7692191
P.S. I need some pedals from a 96-98 if any one has any.....
Does the 96-2004 Steering shaft work on this conversion?
Does the 2003/4 Cobra steering rack work and is i power assist?
Is the PBH front accessory kit going to impact my sway bar use?
Anyone have the technical article on the swap bar spacing and getting everything to work, I hear a million tiny pieces of information, need one good detailed link.
Has anyone else used a 96-98 k-member instead of the tubular, I saw Sean Hyland use the regular fox one and notch the member and I hear of others using the 96-98, haven't heard any real details yet.
Lastly, does anyone know of a nice custom steering wheel that has the cruise control settings in it? I love the 94/95 Steering wheel and the early ones fit but there is about a two inch difference pushing the steering wheel towards the driver. The simple solution is to put a 90 or better column in and use the steering wheel, but I am stubborn and want tilt. Since I am not going crazy in some other areas, I wouldn't mind spending to have the column issue addressed by a custom steering column shop as that 94'95 wheel looks nice...
http://www.stangnet.com/mustang-for...ring-wheel-into-87-89-fox.763027/#post7692191
P.S. I need some pedals from a 96-98 if any one has any.....