rusqtsi
Active Member
Need some assistance getting the starter to run.
Here is the scenario:
1- 89 mustang standard tranny
2- 04 cobra engine
3- Ron Francis wiring MK-97
Pumps are priming, lights are on, but wont crank.
I had to tap in to the ignition source red/lg wire.
If i take the screw driver route by touching both post on the starter solenoid the started will turn the engine otherwise it wont work.
Look at the pics and tell me where i went wrong.
Thanks in advanced.
Rock has been helping me but i figure to post it in case someone knows.
Here is the scenario:
1- 89 mustang standard tranny
2- 04 cobra engine
3- Ron Francis wiring MK-97
Pumps are priming, lights are on, but wont crank.
I had to tap in to the ignition source red/lg wire.
If i take the screw driver route by touching both post on the starter solenoid the started will turn the engine otherwise it wont work.
Look at the pics and tell me where i went wrong.
Thanks in advanced.
Rock has been helping me but i figure to post it in case someone knows.