Roadhawg
Active Member
This is a really awesome project...........
If you need extra wrenching help let me know.
If you need extra wrenching help let me know.
-
Hello there guest and Welcome to Modular Fox Mustangs home of the 2V, 3V, 4V, Coyote Modular Mustang Conversion Information Website!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
Norfolk modular fox build
- Thread starter norfolknova
- Start date
norfolknova
Active Member
Sure thing. As it stands right now, next Saturday Myself and my buddy Tim (the other person financially in on this project) are planning on working on it. We are going to start with removing the bed and the as much of the front end as possible, get the cab light enough to manhandle off the frame. Once we are down to frame and running gear we will get the chassis into the garage to pull the running gear.
It has a 351W which the previous owner said was worked not too long before it was parked, so we will go through it and see what the condition is before we decide what we are going to do with it.
The options for the engine so far are finding a fox or SN95 in need of an oversized engine for a swap and a flip, or possibly stuffing it into Tims Bronco.
It has a 351W which the previous owner said was worked not too long before it was parked, so we will go through it and see what the condition is before we decide what we are going to do with it.
The options for the engine so far are finding a fox or SN95 in need of an oversized engine for a swap and a flip, or possibly stuffing it into Tims Bronco.