getting started on mark 8

[whiteponygt]

ive read plenty of post but this is first time posting im getting everything ready to start my swap.Lucky people around here cant drive so i have purchased pleanty of donor cars i have 97 mark 8 for motor...97 4.6 gt for cross member trans and interior,98 v6 for any other needed parts. Motors and trans installation seem cut and dry, along with hydroboost.the only part that scares me is the wiring ive seen diagram upon diagrams but i guess i just need to do it.im curious to know what parts i can use off the v6 fuel lines? cross memeber? heater box? body harness. also which a arms do i use? the fox the mark or the gt?also anyone have pics on how they routed wiring harnesses.im excited to get started and any info would help.

 

[ponyboy89lx]

Welcome to the site, i used fox a-arms with 96 GT k-member, wiring not sure i run a dizzy in mine, crossmember from fox can be used but needs modified its a easy mod.

 

[vabeachsand]

I have a dizzy setup, but have not figgured out the wiring just yet. For the fuel lines, I would recommend converting your car to a return system, since it is much easier to work with. Some people have used the mark 8 vehicle harness, but encounter issues w/ the pcm.