07 gt 4.6 3v into a 93 coupe

[rcustomz]

about 95% done, just need a few more things and i'll be driving it. Starts and runs great.. i used the full 07 gt harness and cluster, just trying to make everything look like it belongs. Headlights work, and sequential tail lights .. i used gt tail lights.

 

[Bignate76]

Is the shifter not in the original fox location?

 

[rcustomz]

i used the 07 gt trans, along with the harness and it had a hurst short throw. so i moved it back to fit right.

 

[rcustomz]

also, shortened the e-brake handle

 

[Bignate76]

Does the 07 GT transmission have different shifter plates so you can move the shifter wherever you want or did you have to move the engine on the Cradle to get it to move back to where you want it?

 

[rcustomz]

Does the 07 GT transmission have different shifter plates so you can move the shifter wherever you want or did you have to move the engine on the Cradle to get it to move back to where you want it?

the 07 gt trans has the remote shifter, it has linkage that sets it back a few inches. i had to cut the tunnel a little bit for it to fit

 

[rcustomz]

It's official done, just have the A/C left but i've been driving it... and it was at MW 2016

 

[cobfa9646]

looks awesome

 

[Alex]

What headers did you end up using ?

 

[cobfa9646]

I used stock headers with the adapters...I was trying to use a stock k member. I'm having to modify the hpipeit is to tight. I ended using a tubular km ember anyways. If I did it again I would use full length headers.

 

[Alex]

I used stock headers with the adapters...I was trying to use a stock k member. I'm having to modify the hpipeit is to tight. I ended using a tubular km ember anyways. If I did it again I would use full length headers.

Thanks. I am using a Team Z k member. Just working on other things first haven't tried to fit the engine yet.

 

[Lukepritchett18]

I know this is an older thread but how much trouble was it wiring the Fox dash to the s197 harness? Also what’d you do for your fuel system as far fuel pump?

 

[Bill]

Hi Luke, welcome to the party. I don't do much wiring, but I'm hopeful that someone will get back to you soon.