• Hello there guest and Welcome to Modular Fox Mustangs home of the 2V, 3V, 4V, Coyote Modular Mustang Conversion Information Website!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

driveshaft?

modularf

Well-Known Member
you would have to measure it first.. Our stock drive shaft fit with an extension from Steeda..
 

Attachments

  • shaft.jpg
    shaft.jpg
    24 KB · Views: 93
  • shaft.jpg
    shaft.jpg
    24 KB · Views: 93
  • shaft.jpg
    shaft.jpg
    24 KB · Views: 92

87_notchfox

justr another notch among the rest...
Donator
well i use one from a 96 mustang for my 4.6 dohc and t-45...not cutting required
 

ponyboy89lx

Well-Known Member
Staff member
im running tremec 3650 with matching shaft went right in no cutting on the shaft. But you will need to modify the crossmember or buy the aftermarket kit made for the swap, i think roachedone bought the kit. I chopped my stock cross up and made it work.
 

Speedtospare

Well-Known Member
I bought the offset cross member as you can see in the picture. I'm not sure if its the same for the 5 speed.

attachment.php
 
Top