andres aza
New Member
hello friends, im from venezuela and my english is not very good but i will try my best...
i have a 87 mustang gt in good condition, i recently purchase a 4.6 2v pi with all wiring and ecu to do a full swap, i need to know whats parts i need to do a CHEAP SWAP, i just want to do a fully functioning swap and in the future put some bolt ons and maybe cams. im a well skilled technician with all kind of tools to use.
BASICALLY i need to know what i need to put a 4.6 2v with a t45 tranny on a fox body:
-what about the k-member ? can i use the stock k member or i need to find a SN-95 k-member?
- i will use the stock modular returnless fuel system, there is room to swap the entire fuel tank from a 01gt or i need to modify the stock tank?
-there is a direct bolt on driveshaft to fit with my t45 tranny and 8.8 rear end in my fox? or i need to modify the stock driveshaft? will a t5 bellhousing pattern fit in the 4.6 2v?
- tell me about the steering rack, what rack i need to use? remember would be better to me if i can use oem steering racks due to the lack of aftermarket parts here in my country
-i had learned about the brake modifications when put a modular swap... is it really necessary to put a manual brake kit or there is room with the 4.6 2v to maintain the stock brake system??
other ideas will be apreciate aswell... thank you very much !
i have a 87 mustang gt in good condition, i recently purchase a 4.6 2v pi with all wiring and ecu to do a full swap, i need to know whats parts i need to do a CHEAP SWAP, i just want to do a fully functioning swap and in the future put some bolt ons and maybe cams. im a well skilled technician with all kind of tools to use.
BASICALLY i need to know what i need to put a 4.6 2v with a t45 tranny on a fox body:
-what about the k-member ? can i use the stock k member or i need to find a SN-95 k-member?
- i will use the stock modular returnless fuel system, there is room to swap the entire fuel tank from a 01gt or i need to modify the stock tank?
-there is a direct bolt on driveshaft to fit with my t45 tranny and 8.8 rear end in my fox? or i need to modify the stock driveshaft? will a t5 bellhousing pattern fit in the 4.6 2v?
- tell me about the steering rack, what rack i need to use? remember would be better to me if i can use oem steering racks due to the lack of aftermarket parts here in my country
-i had learned about the brake modifications when put a modular swap... is it really necessary to put a manual brake kit or there is room with the 4.6 2v to maintain the stock brake system??
other ideas will be apreciate aswell... thank you very much !