dasmustang
Member
Nice
-
Hello there guest and Welcome to Modular Fox Mustangs home of the 2V, 3V, 4V, Coyote Modular Mustang Conversion Information Website!
To gain full access you must Register. Registration is free and it takes only a few moments to complete.
Already a member? Login here then!
Modfox gas neck question.
- Thread starter Wreckedj30
- Start date
Wreckedj30
Active Member
Your welcome guys, so far no leaks or any problems with the neck modification. Sorry I haven't been around, I came across a bugeye subaru and have been researching my next project.!
badazzvert
Member
great post
RobotWrench
Member
Did this ever become a thread? Very interested in this information. Thanks in advance
I haven't seen it, but I know the tech is posted on here. There are several ways to skin that cat.
foxannne
just wingin it
long shot.
does anyone still have that gold car write up??
does anyone still have that gold car write up??
I don't have the write up, but what information are you looking for?
I actually might have it on an old removable hard drive. I'll try to remember to look this weekend.
foxannne
just wingin it
"If you're talking about a red 88 coupe that got a complete 03 terminator swap and an ugly gold(ish) paint job at the end, I have it on my hard drive. It is 12.5mb, with lots of pics. I couldn't find it on the net anywhere."
would be really valuable to me man!
email is daaavewilliams@gmail.com
would be really valuable to me man!
email is daaavewilliams@gmail.com
I did not get the opportunity to hunt for it this weekend, but hope to do so early during the week. That computer is long gone, so it is likely on one of the many thumb drives I have stashed in a drawer.
foxannne
just wingin it
sounds great would love to see some hardcore information, if you have any other write ups on old thumb drives. more than interested,
ive got alot done, still need valuable information on fuel pump, tank routing, use sn95 tank/pump?
or fox tank sn95 pump if thats feasible?
how have other people done this?
mocking up crossmember mounts in now. driveshaft is just a tad too long it seems ideally i get that figured out
ive got alot done, still need valuable information on fuel pump, tank routing, use sn95 tank/pump?
or fox tank sn95 pump if thats feasible?
how have other people done this?
mocking up crossmember mounts in now. driveshaft is just a tad too long it seems ideally i get that figured out
Okay, I went through a dozen thumb drives with over 60,000 files. If I still have it, it is in a box or on an old laptop, so no love here for the moment.
You can use a fox tank with this fuel pump hanger
High Flow Fuel Pump Hanger for 1986 – 1997 Mustangs
Pro-M Racing High Flow Fuel Pump Hanger for 1986 – 1997 Mustangs! Finally, a real solution to the Mustang fuel pump hanger problem! The aftermarket has been selling high volume fuel pumps for Mustangs for many years. But until now, no one has addressed the other half of the problem... The 1/4”...
www.promracing.com
foxannne
just wingin it
thanks for the effort bill!
foxannne
just wingin it
hell yes, sign me upYou can use a fox tank with this fuel pump hanger
High Flow Fuel Pump Hanger for 1986 – 1997 Mustangs
Pro-M Racing High Flow Fuel Pump Hanger for 1986 – 1997 Mustangs! Finally, a real solution to the Mustang fuel pump hanger problem! The aftermarket has been selling high volume fuel pumps for Mustangs for many years. But until now, no one has addressed the other half of the problem... The 1/4”...
That really is a nice looking setup. I might have to try that one on my next build. I'm planning on starting another one this summer. It has been years since I actually did a full build. I have probably forgotten half of the tricks to make the dash fit, which was the hardest part for me.