• Hello there guest and Welcome to Modular Fox Mustangs home of the 2V, 3V, 4V, Coyote Modular Mustang Conversion Information Website!
    To gain full access you must Register. Registration is free and it takes only a few moments to complete.
    Already a member? Login here then!

please help

benstein IBC

Active Member
i just installed a brand new wildwood big brake kit on my 96 cobra swapped foxbody. i dont have abs. when i brake hard the front right tire locks up. dont know why, car pulls to the right too... any suggestions?
 

Bill

Well-Known Member
Staff member
Donator
So, I went through the Bendix factory school years ago. I've never worked with Wilwood brakes. If this were mine, I would look to the proportioning valve and bias valve. Most brands have some sort of distribution block that determines left/right bias and front/back bias. There is also a residual pressure valve that maintains a bit of pressure on disk breaks. I know your post is a month old. Let us know what you found. It could also be something simple like a seized float pin.
 

benstein IBC

Active Member
So, I went through the Bendix factory school years ago. I've never worked with Wilwood brakes. If this were mine, I would look to the proportioning valve and bias valve. Most brands have some sort of distribution block that determines left/right bias and front/back bias. There is also a residual pressure valve that maintains a bit of pressure on disk breaks. I know your post is a month old. Let us know what you found. It could also be something simple like a seized float pin.
sorry for the late reply. i figured it out it hada few air bubbles in the front left caliper. thanks for your help
 
Top